Theme Park Enthusiast Vinyl Sticker, Car Bumper Sticker, Rollercoaster Enthusiast Gift, Campervan Stickers, Travel Sticker, Mirror Decal

The perfect gift for any theme park enthusiast! Style up your car (or any surface, for that matter) with this permanent, weather-proof vinyl sticker 🚗🎢

OPAL (HOLOGRAPHIC) is the vinyl shown in the 1st photo, in size Medium ✨

📏Need a specific size? Pop a note in your order at checkout or send us a message/email/DM

@thecovenofcolour on Instagram and TikTok 🖤

Don't like this design? Check out the other listings! Still no designs that catch your eye? We take custom requests for absolutely any design.

🌸 PRODUCT SIZING 🌸
(width x height)
Extra Small = 2.5" x 0.8"
Small (for interior car cosmetic mirrors) = 4" wide (see design difference in images)
Medium (as pictured on white car) = 5 x 1.589"
Large = 6" x 1.91"
Extra Large = 7" x 2.23"

🌼As these stickers are lovingly handmade to order, sizing is approximate and may vary slightly. Need a custom size? DM or contact us and we will happily accommodate🌼

🌈 Vinyl colours may vary slightly, as they appear differently on other devices and screens 🌈

🌦️ Fully weather resistant
💡 UV resistant
🧼 Dishwasher safe
💖 Adhesive lasts for up to 3 years! 

🚗 HOW TO APPLY YOUR DECAL TO YOUR CAR 🚗

🥶 AVOID applying in super cold weather! If you're struggling to get the decal to stay on when removing the transfer paper, keep the transfer paper stuck on for a while keep pressing firmly and rubbing over with a squeege (or bank card), and heat up your car's windscreen internally before trying to remove. You can also apply heat to the glass before applying the sticker. The adhesive sometimes needs some extra warmth to activate during winter months 🥶

1. Clean the glass thoroughly with alcohol or window cleaner. Ensure the surface is bone dry before you apply, you can use kitchen roll. Make sure your car is clean, and don't apply in cold & wet weather. It's suggested that you only apply your sticker to car glass, not the body. I am not liable for any damage or paint lifting if you choose to apply your stickers to painted surfaces.
2. Slowly and carefully, peel the backing away from the sticker. Just the design stuck to the guide paper will remain.
3. Press firmly into place, use a mini squeegee (or a bank card) to make sure the sticker is fully adhered, and that there are no air bubbles.

4.  Slowly peel away the clear transfer tape, it’s best at an angle. You can use the squeegee or bank card to push down any bits that need a helping hand.